|
 PAM26 | SBV.12.01 | Replacement of serial plate due to wind speed misprint.
| PAM2600002
to
PAM2600012
PAM2600038
to
PAM2600039
PAM26-06-00058
PAM26-06-00063
to
PAM26-06-00065
PAM26-06-00085
to
PAM26-06-00087
PAM26-06-00089
to
PAM26-06-00092
PAM26-06-00094
PAM26-06-000095
to
PAM26-06-000096
PAM26-06-00097
PAM26-06-00140 | 22/03/2012 |
| A38E | SBV.11.11 | A potential problem affecting a batch of over centre cartridge valves used on the upper / lower lift and telescopic boom cylinders of A38E machines | 4173
4323
4330
4560 to 4614 | 09/11/2011 |
| A46JRT | SBV.11.10 | MANDATORY inspection of blanking plugs fitted to the cylinder valve block | A46JRT-01-010122
A46JRT-01-010505
A46JRT-01-010507
A46JRT-01-010509
A46JRT-01-010510
A46JRT-01-010513
to
A46JRT-01-010515
A46JRT-01-10508
A46JRT-01-10511
A46JRT-01-10512
A46JRT-01-10516
A46JRT-01-10522
AB46RT10116
AB46RT10503
AB46RT10504
AB46RT10506 | 24/10/2011 |
| A46JRT | SBV.11.05 | MANDATORY replacement of the steering valve | A46JRT-01-010122
to
A46JRT-01-010125
A46JRT10500
to
A46JRT10510
AB46RT10000
to
AB46RT10011
AB46RT10021
to
AB46RT10024
AB46RT10051
to
AB46RT10054
AB46RT10104
AB46RT10105
AB46RT10108
to
AB46RT10113
AB46RT10115
to
AB46RT10121
AB46RT10503
AB46RT10504 | 11/08/2011 |
| M1230E | SBV11.13 | Potential issue with incorrect fitting of ‘R’ clips to retain the brake cylinder pivot
| M1230-06-054180
M1230-06-054349
M1230-06-054346
M1230-06-054358
M1230-06-054359
M1230-06-054368
to
M1230-06-054372
M1230-06-054386
M1230-06-054389 | 13/12/2011 |
| M1230E | SBV.11.06 | Instructions to modify the machine lubrication and brake spring adjustment | ALL | 25/08/2011 |
| Pop-Up/Pop-Up+ | SBV.11.07 | Service advisory to make modifications to all original Pop-Up & Pop-Up+ machines | ALL | 29/09/2011 |
| S1930E | SBV.11.02 | MANDATORY replacement of guardrail retaining pins | S1930-04-000001
to
000119
S0808080430
to
S0808080433
S0808040407
S0808040408
S1930E00004
S1930E00021 | 24/01/2011 |
| S1930E | IP-1360580 | Installation procedure to upgrade slide block field | S1930E
000000 to 000084 | 26/04/2011 |
| S1932E | IP-1360580 | Installation procedure to upgrade slide block field | S1932E
000000 to 000010 | 26/04/2011 |
| S2646E | SBV11.12 | MANDATORY inspection and modification of front and rear guardrails
| S2646-01-000001
to
S2646-01-000009
S2646-04-000003
S0807120227 | 13/12/2011 |
| S3246 | SBV.11.09 | Service advisory to inspect the pump hosing and dump valve | S0807120227
S3246-04-000001
S3246-04-000029
S3246-04-900000
S3246-04-900025 | 20/10/2011 |
| S3246E | SBV11.12 | MANDATORY inspection and modification of front and rear guardrails
| S3246-04-000001
to
S3246-04-000029
S3246-04-90000
to
S3246-04-90015 | 13/12/2011 |
| SB66JRT | SBV.11.03 | MANDATORY inspection of the rotate mechanism pin cap | SB6610000
SB6610003
SB6610022
SB6610057
SB6610100
to
SB6610103 | 21/04/2011 |
| TM12 | SBV.11.06 | Instructions to modify the machine lubrication and brake spring adjustment | ALL | 25/08/2011 |
| X Series | SBV.11.08 | Service Bulletin mandatory machine inspection and weld repair to be carried out immediately | X26N - 51172 to 51200
X26 - 53251
X32 - 53250 | 19/10/2011 |
| AB46E | SAU.10.04 | Service advisory to reduce the electrical current loading on the main hydraulic pump motor | 10025 to 10120 | 14/05/2010 |
| MB20/MB26 | SBU.10.02 | Service advisory regarding the machine re-rating of the MB20 and MB26, in compliance with the European Machinery Directive (2006/42/EC) | MB20 150 to 270
MB26 275 to 443 | 19/05/2010 |
| SLH/SR Scissors | 569420 | Service advisory to ensure proper operation of the lift cylinder lock valve solenoids and coils | ALL | 10/01/2010 |
| TM12 | SAU.10.03 | Service advisory to change the lubrication of mast assemblies | ALL | 14/05/2010 |
| TM12 | SAU.10.03 | Process instruction to change the lubrication of mast assemblies | ALL | 14/05/2010 |
| UL25/UL32/UL40 | SBU.10.01 | Service advisory to inspect the power to platform 'flying lead' on ANSI specification 220V AC UL Series machines | 31089 to 31407 | 01/11/2010 |
| XRT Series | SBU.10.06 | Service advisory to inspect the XRT manual platform lower | 10000 to 10150 | 19/05/2010 |
| AB38 | SBU.09.07 | Service advisory regarding the machine re-rating of the ANSI AB38N rated work load | 3359 to 3895 | 27/10/2009 |
| AB38 | SBU.09.06 | Service advisory regarding the machine re-rating in compliance with the European Machinery Directive (2006/42/EC) | AB383301
to
AB383977
AB384000
to
AB384250 | 29/07/2009 |
| AB38 | SBU.09.03 | MANDATORY requirement for (missing) adhesive to be applied to wheel studs to prevent detachment from the gearbox housing | Applies to machines shipped between
Jan 2004 - July 2007
Contact us for a full list of serial numbers. | 25/03/2009 |
| AB38 | N/A | Service advisory to fix the wheel studs, affecting all serial numbers. | ALL | 25/03/2009 |
| AB46E | SBU.09.04 | Service advisory for the replacement of pivot locking pins (065214-000 and 065214-001) | 10000-10011
10021-10075
10050-10075 | 30/03/2009 |
| AB46RT | SBU.09.04 | Service advisory for the replacement of pivot locking pins (065214-000 and 065214-001) | 10000-10011
10021-10075
10050-10075 | 30/03/2009 |
| AB80/AB85RJ | IP-0421732 | Installation procedure for the base boom repair | | 21/12/2009 |
| MX19 | SBU.09.06 | Service advisory regarding the machine re-rating in compliance with the European Machinery Directive (2006/42/EC) | 50440 to 52099
53000 to 53200
17074
17837
17852
20479
40075
40076
40108. | 29/07/2009 |
| Snorkel Booms | SB.0421708 | Service advisory for the inspection of all cylinder rods stored for more than 30 days to check for rust. | ALL | 29/01/2009 |
| Snorkel Booms | 421708 | Protection of cylinder rods | ALL | 29/01/2009 |
| SRT2770 | SBU.09.05 | Service advisory to inspect the drive motor shafts | NZ000401
to
NZ060908 | 29/07/2009 |
| X26/X26UN/X32 | SAU.09.02 | Service advisory to replace the wheel yoke retaining pin | | 22/01/2009 |
| X32 | SBU.09.06 | Service advisory regarding the machine re-rating in compliance with the European Machinery Directive (2006/42/EC) | 50095 to 52000
53000 to 53099 | 29/07/2009 |
| AB38 | SAU08.01 | Service advisory to check and adjust forward & reverse elevated drive speeds | ALL | 22/10/2008 |
| K13 | SBU08.02 | Aerial K13 lower boom change | Manufactured pre-Janaury 2003 | 19/02/2008 |
| MX19 | SAU08.01 | Service advisory to check and adjust forward & reverse elevated drive speeds | ALL | 22/10/2008 |
| SL26SL/SL30SL | SBU08.01 | Floating axle control logic modification | 50001 to 50209 | 10/01/2008 |
| SL26SL/SL30SL | SBU08.01 | Service advisory to modify the floating axle control logic | 50001 to 50209 | 10/01/2008 |
| SL26SL/SL30SL | SAU08.01 | Service advisory to check and adjust forward & reverse elevated drive speeds | ALL | 22/10/2008 |
| TM12 | SAU08.01 | Service advisory to check and adjust forward & reverse elevated drive speeds | ALL | 22/10/2008 |
| UL Series | SBU07.09 | Caster wheel mounting | 30000 to 30886 | 23/01/2008 |
| UL Series | SBU07.09 | UL Series - caster wheel mounting | 30000 to 30886 | 23/01/2008 |
| UL Series | SBU.07.09 | MANDATORY inspection of wheel mounts to ensure castor wheel assembly is securely mounted on the chassis | 30000 to 30886 | 23/01/2008 |
| X26/X26N/X32 | SAU08.01 | Service advisory to check and adjust forward & reverse elevated drive speeds | ALL | 22/10/2008 |
| X27RT/X33RT | SBU08.07 | X27RT & X33RT wheel bolt torque setting | 10000 to 10058 | 26/08/2008 |
| X27RT/X33RT | SBU08.07 | X27RT & X33RT wheel bolt torque setting | 10000 to 10058 | 26/08/2008 |
| AB38 | SB07.07 | AB38 Inner boom to transition welding | AB383702
AB3838009
to9
AB383899
AB383900 9
to
AB383971 | 13/08/2007 |
| SL26/SL30 | SBU.07.08 | MANDATORY removal and replacement of existing valves from manifold ports CT13 and CT14 with newly designed valves. | SL26
50081 to 50123
13223 to 30020
SL30
50038 to 50134
10864 to 50037 | 11/10/2007 |
| TL50 | SB.07-04-23-04 | MANDATORY inspection of the welds on the seam of the inner or Teleboom on the TL50 | 2031 to 2038 | 23/04/2007 |
| AB62 | AB.05.04-1 | Service advisory to provide grease application point on slave cylinder head assembly | 1000 to current | 14/04/2005 |
| TM12 | SB04.01 | MANDATORY installation of replacement platform due to insufficient powdercoat inside mast | 7601
to
7649
7673
7677 | 01/02/2004 |
| X32 | SI04.01 | Service advisory to install orifice in valve block lift/lower circuit | 1000 to current | 01/01/2004 |
| AB46 | SA04.01 | Service advisory to install gravity latch to satisfy the requirements of the Swedish Work Environment Authority's Directive which was communicated on June 16, 2003 | 1000 to current
(Sweden only) | 14/07/2003 |
| LX31/41/50 | SB.03.01 | Service advisory to ensure proper fit of front wheel motor hubs and inspect for possible damage to motor shafts | 1300 to 4472 | 01/11/2003 |
| MX19 | SI.03.01 | Service advisory to replace the 069199-000 battery charger with 069199-001 battery charger | 17500 to current | 01/08/2003 |
| SB60 | SI.03.02 | Service advisory to adjust of the turret swing gear engagement | 1000 to current | 15/11/2003 |
| SL26RT/SL30RT | SI02.02A | Service advisory to Improve performance and reliability of Drive Motors | 11200 to current | 01/02/2003 |
| SL26SL/SL30SL | SI02.02A | Service advisory to Improve performance and reliability of drive motors | 11200 to current | 01/02/2003 |
| ULII | SA04.01 | Service advisory to install gravity latch to satisfy the requirements of the Swedish Work Environment Authority's Directive which was communicated on June 16, 2003 | 15000 to current (Sweden only) | 14/07/2003 |
| LX31/LX41 | SI.02.03 | Service advisory for the installation of outriggers on LX 31 and LX41 | Eurodiesel/12V | 27/07/2002 |
| SL26RT/SL30RT | SI.02.02 | Service advisory to improve Performance and Reliability of Hydraulic Drive Motors | 11200 to current | 31/07/2002 |
| SL26SL/SL30SL | SI.02.02 | Service advisory to improve performance and reliability of hydraulic drive motors | 11200 to current | 31/07/2002 |
| TM12 | SB.02.01 | Service advisory to install a capacitor in the motor control drive circuit to ensure a 10 millisecond null input | 5000 to 7027 | 10/01/2002 |
| X Series | SB.02.04 | Service advisory to simplify the operation and improve the safety of the Gate Latch Assembly - Models with entry gate | 1001 to 20116 | 01/12/2002 |
| X27RT/X33RT | SB.02.03 | Service advisory to simplify the operation and improve the safety of the guardrail and gate locking pin assemblies | 1000 to 3153 | 01/11/2002 |
| LX Series | SI.01.05 | Service advisory to improve braking endurance | | 15/07/2001 |
| MX15/MX19 | SB01.02 | MANDATORY enhancement of the braking system comfort | 14000 to 17170 | 09/02/2001 |
| SB60 | SB01.03 | Service advisory to enhance performance of the turret rotate | 1000 to 1418 | 29/03/2001 |
| SB60 | SB01.01 | MANDATORY installtion of case drain return line to the hydraulic tank | 1102 to 1408 | 07/02/2001 |
| SB80 | SI.02.01 | Service advisory to re-route tank line from hydraulic oil cooler directly to the pump, necessary in all cold-weather areas. | ALL | 03/01/2001 |
| SL26RT/SL30RT | SI.01.04 | MANDATORY identification of the Model and Serial of white hydraulic brakes with potential weak braking at maximum gradeability | 13782 to 13840 | 30/07/2001 |
| SL26SL/SL30SL | SI.01.04 | MANDATORY identification of the Model and Serial of white hydraulic brakes with potential weak braking at maximum gradeability | 13782 to 13840 | 30/07/2001 |
| TM12 | SB01.05 | MANDATORY enhancement of the braking system comfort | 5000 to 6554 | 01/05/2001 |
| X Series | SI.01.03 | Service advisory to make a wiring change at the upper and lower control box (excluding X20N) | 15020 onwards | 21/03/2001 |
| X Series | S1.01.02 | Service advisory to inspect the pivot bolt in the brake linkage - Wide models | 6012 onwards | 31/01/2001 |
| X20N | SI.01.01 | Service advisory to inspect the pivot bolt in the brake linkage | 6012 onwards | 31/01/2001 |
| XR Telehandler | SB01.04 | Service advisory to enhance the performance of the frame level and boom retract | PET7, 137, 139, 140, 142, 143, 144, 149, 150, 151, 152, 153, 156 | 06/03/2001 |
| XRT | SI.01.04 | MANDATORY identification of the Model and Serial of white hydraulic brakes with potential weak braking at maximum gradeability | 3041 to 3100 | 30/07/2001 |
| AB38 | SB00.09 | MANDATORY performance enhancement of the main hydraulic manifold cartridge valves | 1812 to 2032 | 01/07/2000 |
| AB46 | SB00.29 | MANDATORY wheel installation inspection | 2007 to 2073 | 19/10/2000 |
| AB46RT | SB00.11 | MANDATORY enhancement of the durability of the front axle | 1000 to 1900 | 01/07/2000 |
| AB46RT | SB00.05 | Optional enhancement of the engine perfomance - DF models | 1000 to 2000 | 30/03/2000 |
| AB62 | SB00.21 | MANDATORY enhancement of fuel tank durability | 1096 to 1188 | 20/09/2000 |
| AB62 | SB00.02 | Service advisory to enhance the performance of turret rotation | 1097 to 1120 | 06/03/2000 |
| LX Series | SB00.29 | MANDATORY wheel installation inspection | 3384 to 3548 | 19/10/2000 |
| LX31/41/50 | SB00.26 | MANDATORY performance improvement of outrigger operation | 2747 to 4022 | 20/10/2000 |
| LX31/41/50 | SB00.25 | MANDATORY enhancement of axle lock cylinder durability | 3305 to 4022 | 20/10/2000 |
| LX31/41/50 | SB00.22 | MANDATORY enhancement of outrigger durability, affecting models with outriggers | 3198 to 3725 | 20/09/2000 |
| LX31/41/50 | SB00.20 | MANDATORY brake durability enhancement, affecting 2WD models | 1000 to 1409 | 01/08/2000 |
| LX31/41/50 | SB00.19 | MANDATORY brake durability enhancement, affecting 4WD models | 1000 to 1409 | 01/08/2000 |
| LX31/41/50 | SB00.18 | MANDATORY brake durability enhancement, affecting 2WD models | 1410 to 2746 | 01/08/2000 |
| LX31/41/50 | SB00.17 | MANDATORY brake durability enhancement, affecting 4WD models | 1410 to 2746 | 01/08/2000 |
| LX31/41/50 | SB00.16 | MANDATORY brake durability enhancement, affecting 2WD models | 2727 to 3755 | 01/08/2000 |
| LX31/41/50 | SB00.15 | MANDATORY brake durability enhancement, affecting 4WD models | 2747 to 3797 | 01/08/2000 |
| LX31/41/50 | SB00.01 | MANDATORY Axle Float Cylinder Fitting Adapter position check, affecting 4WD models | 100 to 3103 | 04/01/2000 |
| MB20/MB26 | SB00.31 | MANDATORY replacement of printed circuit board | MB20 0001 to 0016
MB26 0001 to 0010 | 16/10/2000 |
| MB20/MB26 | SB00.30 | MANDATORY replacement of trunking cover | MB20 0002 to 0008
0011
MB26 0001 to 0003
0007 | 26/09/2000 |
| MX Series | SI00.13.MX | Service advisory to improve gradeability | 12900 to 14000 | 08/06/2000 |
| MX15/MX19 | SB00.12 | MANDATORY prevention of water ingress into the motor controller | 14000 to 14167 | 01/07/2000 |
| SB60 | SB00.27 | MANDATORY support of the cat track assembly | 1342 to 1398 | 30/10/2000 |
| SB60 | SB00.02 | Service advisory to enhance the performance of turret rotation | 1000 to 1318 | 06/03/2000 |
| SB80 | SB00.32 | MANDATORY replacement of front axle king pins | 1337 to 1453 | 30/10/2000 |
| SB80 | SB00.04 | MANDATORY enhancement in the performance of the Master Levelling Cylinder | 1337 to 1436 | 10/03/2000 |
| SB80 | SB00.03 | Service advisory to enhance the performance of the turret rotation | 1337 to 1415 | 06/03/2000 |
| SB80 | SB00.02 | Service advisory to enhance the performance of turret rotation | 1337 to 1410 | 06/03/2000 |
| SL20 | SB00.24 | MANDATORY weight addition to chassis | 9359 to 9507 | 25/10/2000 |
| TL33 | SB00.08 | MANDATORY performance enhancement of the main hydraulic cartridge valves | 1748 to 1771 | 01/07/2000 |
| TL38 | SB00.10 | MANDATORY performance enhancement of the main hydraulic manifold cartridge valves | 1225 to 1365 | 01/07/2000 |
| TL38 | SB00.07 | MANDATORY performance enhancement of the main hydraulic and outrigger hydraulic manifold cartridge valves | 1225 to 1365 | 01/07/2000 |
| TL49 | SB00.06 | MANDATORY performance enhancement of the main hydraulic and outrigger hydraulic manifold cartridge valves | 1317 to 1389 | 01/07/2000 |
| U-Drive 25 | SB00.27U-drive | MANDATORY enhancement of the electrical emergency stop circuit | 1000 to 1050 | 20/10/2000 |
| X31N | SB00.23 | MANDATORY weight addition to chassis | 13533 to 16067 | 20/09/2000 |
| AB38 | SB99.4 | MANDATORY - addition of Bushings to Lift Cylinder Trunnion mount | 1500 to 1724 | 22/02/1999 |
| AB46 | SB99.5 | Service advisory to filter control signal - Electric & Bi-Energy models | 1000 to 1768 | 01/06/1999 |
| AB46 | SB99.2 | Service advisory to adjust the engine idle speed - 2WD Diesel models | 1000 to 1500 | 01/06/1999 |
| AB46RT | SB99.7 | Service advisory to add timer to fuel shut off circuit - Diesel models | 1189 to 1657 | 01/06/1999 |
| LX Series | SB99.8 | Service advisory to enhance drive mode affecting LX machines with outriggers only | 1000 to 2177 | 11/10/1999 |
| LX31/41/50 | SB99.9C | Service advisory to enhance operation of limit switch during outrigger operation, affecting European machines with outriggers | 2747 to 2965 | 15/09/1999 |
| LX31/41/50 | SB99.9B | Service advisory to enhance operation of limit switch during outrigger operation, affecting European machines with outriggers | 1000 to 2746 | 15/09/1999 |
| LX31/41/50 | SB99.9A | Service advisory to enhance function of limit switch during outrigger operation, affecting US machines with outriggers | 1000 to 2965 | 15/10/1999 |
| LX31/41/50 | SB99.1 | MANDATORY - service bulletin for LX31/41/50 with Kubota D905 and WG750 engines to install proper torque on HECO torque hubs | 2298 to 2521 | 05/01/1999 |
| SB60 | SB99.11 | Service advisory to improve starting and charging performance - Gas models | 1102 to 1258 | 11/10/1999 |
| SB80 | SB99.15C | Service advisory to increase performance of the boom extend/retract function | 1300 to 1374 | 13/09/1999 |
| SB80 | SB99.15 | Service advisory to prevent binding of the boom hose and wiring carrier assembly | 1337 to 1339
1342 to 1365 | 13/09/1999 |
| SL20 | SB99.10F | Service advisory to enhance the performance of the electrical circuitry (12 volt toggle) | 8193 to 8556 | 15/06/1999 |
| SL20 | SB99.10E | Service advisory to enhance the performace of the electrical circuitry (12 volt toggle) | 8000 to 8192 | 15/06/1999 |
| SL20 | SB99.10D | Service advisory to enhance the performance of the electrical circuitry (12 volt joystick - proportional) | 8193 to 8556 | 15/06/1999 |
| SL20 | SB99.10C | Service advisory to enhance the performance of the electrical circuitry (12 volt joystick - proportional) | 8000 to 8192 | 15/06/1999 |
| SL20 | SB99.10B | Service advisory to enhance the performance of the electrical circuitry (24 volt toggle) | 8557 to 9002 | 15/06/1999 |
| SL20 | SB99.10A | Service advisory to enhance the performance of the electrical circuitry (24 volt joystick - proportional) | 8557 to 9002 | 15/06/1999 |
| SL26N/SL30N | SB99.3C | MANDATORY - enhancement of pressure protection of drive motors - Electric & Bi-Energy models | 11200 to 12180 | 01/06/1999 |
| SL26N/SL30N | SB99.3B | MANDATORY - enhancement of pressure protection of drive motors - Gas & Diesel models | 11200 to 12180 | 01/06/1999 |
| SL26RT/SL30RT | SB99.3A | MANDATORY - enhancement of pressure protection of drive motors | 11200 to 12180 | 01/06/1999 |
| SL26SL/SL30SL | SB99.3A | MANDATORY - enhancement of pressure protection of drive motors | 11200 to 12180 | 01/06/1999 |
| AB38 | SB98.8 | MANDATORY replacement of counter-balance valves | 1500 to 1564
1568 to 1569 | 18/06/1998 |
| AB46 | SB98.14 | Service advisory to isolate 12 volt circuit from accidental enegagement - Bi-Energy models | 1190 to 1331 | 29/09/1998 |
| AB46 | SB98.12 | Service advisory to restrict the movement of the emergency hand pump lever | 1000 to 1474 | 31/08/1998 |
| AB46 | SB98.11 | MANDATORY - to ensure proper plug braking - Electric & Bi-Energy models | 1001 to 1450 | 10/08/1998 |
| AB46 | SB98.1 | Service advisory to replace cage rotate and turret rotation control knobs | 1000 to 1208 | 05/01/1998 |
| LX Series | SI98.1 | Service Information - wheel nut torque | 1000 to current | 22/01/1998 |
| LX Series | SB98.5 | Service advisory to replace exisiting outrigger cylinder pads and mounting hardware | 1000 to 1870
(with optional outrigger kit) | 20/04/1998 |
| MX Series | SB98.10 | Service advisory to inspect both rear rear spindle/chassis welds | 1000 to 8790 | 27/07/1998 |
| MX15/MX19 | SB98.2 | Service advisory to reposition down and tilt alarm | 5851 to 6205 | 06/04/1998 |
| MX15/MX19 | SB98.19 | MANDATORY - provide additional clearance between the drive motir guards and pothole protection bars | 8791 to 9379
9381 to 9549
9553 to 9570
9572 to 9598
9602 to 9687
9691 to 9694
9698 to 9708
9714 to 9730
9732 to 9733
9759 | 12/10/1998 |
| SB60 | SB98.16 | MANDATORY inspection to assure proper propane supply to engine | 1000 to 1197 | 01/10/1998 |
| SL20 | SB98.7 | MANDATORY - proportional controls, installation of relay kit and keyswitch kit | 8000 to 8192 | 09/06/1998 |
| SL20 | SB98.6 | MANDATORY - toggle controls, installation of relay kit and keyswitch kit | 8000 to 8192 | 09/06/1998 |
| SL20 | SB98.18 | Service advisory to provide proper alignment of the lower linkage assembly | 8000 to 8262 | 12/10/1998 |
| SL20 | SB98.17 | Service advisory to improve the roll-out deck operation | 8000 to 8574 | 05/10/1998 |
| SL20 | SB98.15 | Service advisory to increase drive and lift speed | 8000 to 8572 | 01/10/1998 |
| SL20 | SB98.13 | Service advisory to improve brake reliability | 8012 to 8550 | 29/09/1998 |
| SP37 | SB98.9 | Service advisory to increase protection against abrasion and wear on the electrical harness | 1001 to 1345 | 24/06/1998 |
| SP37 | SB98.4 | Service advisory to replace slew gear box retaining hardware | 1001 to 1360 | 07/04/1998 |
| TL49 | SB98.9 | Service advisory to increase protection against abrasion and wear on the electrical harness | 1001 to 1135 | 24/06/1998 |
| TM12 | SB98.20 | Service advisory to install 4 grease fittings in the mast to permit periodic lubrication and instructions for installation | 1493 to 3405 | 12/10/1998 |
| X31/X32 | SB98.3 | Service advisory to reduce scissor brace end play | 6186 to 8817 | 27/04/1998 |
| AB46 | SB97.5 | MANDATORY addition of doubler plates to chassis weldment - Electric & Diesel models | 1000 to 1072
1074 to 1076
1078 to 1101 | 17/07/1997 |
| AB46 | SB97.11 | MANDATORY installation of exhaust support bracket - 2WD Diesel models | 003 to 1236 | 24/10/1997 |
| LX Series | SB97.7 | MANDATORY replacement of outrigger component | 1000 to 1544
(with optional outrigger cylinder kit) | 28/07/1997 |
| LX Series | SB97.6 | MANDATORY replacement of outrigger component | 1000 to 1544
(with optional outrigger cylinder kit) | 30/07/1997 |
| MX15/MX19 | SB97.3 | MANDATORY addition of diode to the electrical circuit | 6206 to 6538 | 09/06/1997 |
| SL20 | SB97.8 | MANDATORY steering diode poisition | 7596 to 7710 | 02/10/1997 |
| SL26RT/SL30RT | SB97.12 | Service advisory to install axle cylinder kit | 11002 to 11706 | 25/11/1997 |
| SL26SL/SL30SL | SB97.12 | Service advisory to install axle cylinder kit | 11002 to 11706 | 25/11/1997 |
| TL49 | SB97.2 | MANDATORY outrigger component reaplcement | 1001 to 1056 | 01/02/1997 |
| TL49 | SB97.1 | MANDATORY outrigger cylinder replacement | 1057 to 1120 | 12/01/1997 |
| TM12 | SB97.10 | Service advisory to identify premature tire deterioration | 2443 to 2758 | 28/10/1997 |
| UL Series | SB97.4 | MANDATORY replacement of lift cylinder assembly | 17049 to 17116 | 18/06/1997 |
| LX31/LX41 | SB 96.2 | Installation of mounting tab kit | 1000 to 1136 | 01/07/1996 |
| LX31/LX41 | SB 96.1 | Replace two position fuel selector switch with three position switch - Dual fuel models | 1000 to 1025 | 28/02/1996 |
| SL26/SL30 | SB 96.3 | Service advisory to adjust the throttle solenoid | 8800 to 10752 | 01/08/1996 |
| TL33 | PB 96.1 | MANDATORY electrical function modification kit | 1133 to 1359 | 26/06/1996 |
| TL49 | PB 96.5 | Emergency override modification | 1003
1014
1015
1036
1038 | 05/06/1996 |
| SL26/SL30 | SB 95.1 | Suggested modifications to minimise pump wear | ALL up to 1995 | 16/02/1995 |
| TM10 | SB 95.3 | MANDATORY installation of 4 grease fittings | 1100 to 1211 | 01/04/1995 |
| TM12 | SB 95.2 | MANDATORY installation of 4 grease fittings | 1141 to 1492 | 01/04/1995 |
| UR38TR | SB 95.2 | MANDATORY installation of 4 grease fittings | 1000 to 1292 | 01/04/1995 |
| X20W/X26N | SB 94.13 | MANDATORY replacement of the lift cylinder on X20W, and lift cylinder & kicker arm on X26N | 1011 to 1739 | 01/03/1995 |
| MX Series | SB 94.5 | MANDATORY installation of three labels | 1028 to 1037 | 21/03/1994 |
| MX Series | SB 94.4 | MANDATORY installation of shoulder bolt and locknut | 1028 to 1035 | 10/03/1994 |
| SL14 | SB 94.2 | MANDATORY latch plate weldment replacement | 1000 to 1387 | 11/02/1994 |
| SL14 | SB 94.1 | MANDATORY valve guard change | 1000 to 1410 | 15/01/1994 |
| X Series | SB 94.9 | Wiring check | 1000 to 1061 | 01/07/1994 |
| X Series | SB 94.8 | MANDATORY replacement of pothole protection spring assemblies with dual spring assemblies | 1000 to 1380 | 01/07/1994 |
| X Series | SB 94.7 | MANDATORY replacement of both rear axles | 1000 to 1202 | 01/07/1994 |
| X Series | SB 94.6 | MANDATORY installtion of one label | 1017 to 1098 | 21/03/1994 |
| X Series | SB 94.3 | MANDATORY installation of shoulder bolt and locknut | 1040 to 1071 | 10/03/1994 |
| X Series | SB 94.12 | MANDATORY installation of relief valves between power unit and tank | 1402 to 2157 | 10/11/1994 |
| X Series | SB 94.10 | Scissor pin replacement | 1000 to 1522 | 10/08/1994 |
| X20W/X26N | SB 94.11 | MANDATORY addition of lift relief valve | 1000 to 1711 | 01/09/1994 |
| SL20D | SB 93.2 | Steering improvement | 4300 to 4582 | 01/07/1993 |
| ANSI machines | SB 92.4 | Error in ANSI Responsibility manual | | 02/10/1992 |
| SL26 | SB 92.2 | Service advisory to change from 16 gauge wiring to 10 gauge wiring | 8000 to 9107 | 13/04/1992 |
| SL26 | SB 92.1 | Service advisory to lubricate the spline and pump shaft | | 09/03/1992 |
| UL Series | SB 92.3 | UpRight lift power unit malfunction, affecting UL 220v AC units only with date code F492 | 8469 to 8570 | 05/06/1992 |